Specifications

VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
6-36 SecureStack A2 Configuration Guide
6.3.7.1 show gvrp
Use this command to display GVRP configuration information.
show gvrp [port-string]
Syntax Description
Command Defaults
If port-string is not specified, GVRP configuration information will be displayed
for all ports and the device.
Command Mode
Read-Only.
Example
This example shows how to display GVRP status for the device and for Fast Ethernet port 1 in
unit 2:
Table 6-3 provides an explanation of the command output.
port-string (Optional) Displays GVRP configuration information for
specific port(s). For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(rw)->show gvrp fe.2.1
Global GVRP status is enabled.
Port Number GVRP status Last PDU Origin
----------- ----------- -----------------
fe.2.1 enabled 00-e0-63-97-d4-36
Table 6-3 show gvrp Output Details
Output What It Displays...
Port Number Port designation. For a detailed description of possible port-string
values, refer to Section 3.1.1.
GVRP status Whether GVRP is enabled or disabled on the port.
Last PDU Origin MAC address of the last GVRP frame received on the port.