Specifications

VLAN Configuration Command Set
Configuring the VLAN Egress List
6-26 SecureStack A2 Configuration Guide
6.3.4.5 show vlan dynamicegress
Use this command to display the status of dynamic egress (enabled or disabled) for one or more
VLANs.
show vlan dynamicegress [vlan-list]
Syntax Description
Command Defaults
If vlan-list is not specified, the dynamic egress status for all VLANs will be
displayed.
Command Mode
Read-Write.
Example
This example shows how to display the dynamic egress status for VLANs 50-55:
vlan-list (Optional) Displays dynamic egress status for specific
VLAN(s).
A2(rw)->show vlan dynamicegress 50-55
VLAN 50 is disabled
VLAN 51 is disabled
VLAN 52 is disabled
VLAN 53 is enabled
VLAN 54 is enabled
VLAN 55 is enabled