Specifications

VLAN Configuration Command Set
Configuring the VLAN Egress List
SecureStack A2 Configuration Guide 6-25
6.3.4.4 clear vlan egress
Use this command to remove ports from a VLAN’s egress list.
clear vlan egress vlan-list port-string [forbidden]
Syntax Description
Command Defaults
If forbidden is not specified, tagged and untagged settings will be cleared.
Command Mode
Read-Write.
Examples
This example shows how to remove fe.3.14 from the egress list of VLAN 9:
This example shows how to remove all Fast Ethernet ports on unit 2 from the egress list of VLAN 4:
vlan-list Specifies the number of the VLAN from which a port(s) will
be removed from the egress list.
port-string Specifies one or more ports to be removed from the VLAN
egress list of the specified vlan-list. For a detailed
description of possible port-string values, refer to
Section 3.1.1.
forbidden (Optional) Clears the forbidden setting from the specified
port(s) and resets the port(s) as able to egress frames if so
configured by either static or dynamic means.
A2(rw)->clear vlan egress 9 fe.3.14
A2(rw)->clear vlan egress 4 fe.2.*