Specifications

Startup and General Configuration Summary
CLI Command Modes
SecureStack A2 Configuration Guide 2-5
Figure 2-1 Sample CLI Default Description
2.1.3 CLI Command Modes
Each command description in this guide includes a section entitled “Command Mode” which states
whether the command is executable in Admin (Super User), Read-Write, or Read-Only mode. Users
with Read-Only access will only be permitted to view Read-Only (show) commands. Users with
Read-Write access will be able to modify all modifiable parameters in set and show commands, as
well as view Read-Only commands. Administrators or Super Users will be allowed all Read-Write
and Read-Only privileges, and will be able to modify local user accounts. The SecureStack A2
switch indicates which mode a user is logged in as by displaying one of the following prompts:
• Admin: A2(su)->
• Read-Write: A2(rw)->
• Read-Only: A2(ro)->
show port status [port-string]
Command Defaults
If port-string is not specified, status information for all ports will be displayed.
NOTE: Depending on which switch you are using, your default command prompt may be different
from the examples shown.