Specifications

VLAN Configuration Command Set
Reviewing Existing VLANs
SecureStack A2 Configuration Guide 6-5
Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
“DEFAULT VLAN” and it is enabled to operate. Ports allowed to transmit frames belonging to
VLAN 1 are listed as egress ports. Ports that won’t include a VLAN tag in their transmitted frames
are listed as untagged ports. There are no forbidden ports (prevented from transmitted frames) on
VLAN 1:
Table 6-1 provides an explanation of the command output.
A2(rw)->show vlan 1
VLAN: 1 NAME: DEFAULT VLAN Status: Enabled
VLAN Type: Permanent
Egress Ports
host.0.1, fe.1.1-10, fe.2.1-4, fe.3.1-7,
Forbidden Egress Ports
None.
Untagged Ports
host.0.1, fe.1.1-10, fe.2.1-4, fe.3.1-7,
Table 6-1 show vlan Output Details
Output What It Displays...
VLAN VLAN ID.
NAME Name assigned to the VLAN.
Status Whether it is enabled or disabled.
VLAN Type Whether it is permanent (static) or dynamic.
Egress Ports Ports configured to transmit frames for this VLAN.
Forbidden Egress
Ports
Ports prevented from transmitted frames for this VLAN.
Untagged Ports Ports configured to transmit untagged frames for this VLAN.