Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-66 SecureStack A2 Configuration Guide
5.2.2.12 clear spantree adminedge
Use this command to reset a Spanning Tree port to non-edge status.
clear spantree adminedge port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to reset fe.1.11 as a non-edge port:
port-string Specifies port(s) on which to reset edge port status. For a
detailed description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->clear spantree adminedge fe.1.11