Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-64 SecureStack A2 Configuration Guide
5.2.2.10 show spantree adminedge
Use this command to display the edge port administrative status for a port.
show spantree adminedge [port port-string]
Syntax Description
Command Defaults
If port-string is not specified edge port administrative status will be displayed for
all Spanning Tree ports.
Command Mode
Read-Only.
Example
This example shows how to display the edge port status for fe.3.2:
port port-string (Optional) Displays edge port administrative status for
specific port(s). For a detailed description of possible
port-string values, refer to Section 3.1.1
.
A2(rw)->show spantree adminedge port fe.3.2
Port fe.3.2 has a Port Admin Edge of Edge-Port