Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
SecureStack A2 Configuration Guide 5-63
5.2.2.9 clear spantree adminpathcost
Use this command to reset the Spanning Tree default value for port admin path cost to 0.
clear spantree adminpathcost port-string [sid sid]
Syntax Description
Command Defaults
If sid is not specified, admin path cost will be reset for Spanning Tree 0.
Command Mode
Read-Write.
Example
This example shows how to reset the admin path cost to 0 for fe.3.2 on SID 1:
port-string Specifies the port(s) for which to reset admin path
cost. For a detailed description of possible port-string
values, refer to Section 3.1.1
.
sid sid (Optional) Resets the admin path cost for specific
Spanning Tree(s). Valid values are 0 - 4094. If not
specified, SID 0 is assumed.
A2(rw)->clear spantree adminpathcost fe.3.2 sid 1