Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-54 SecureStack A2 Configuration Guide
5.2.2 Reviewing and Setting Spanning Tree Port Parameters
Purpose
To display and set Spanning Tree port parameters.
Commands
The commands used to review and set Spanning Tree port parameters are listed below and described
in the associated section as shown.
• show spantree portadmin (Section 5.2.2.1)
• set spantree portadmin (Section 5.2.2.2)
• clear spantree portadmin (Section 5.2.2.3)
• show spantree portpri (Section 5.2.2.4)
• set spantree portpri (Section 5.2.2.5)
• clear spantree portpri (Section 5.2.2.6)
• show spantree adminpathcost (Section 5.2.2.7)
• set spantree adminpathcost (Section 5.2.2.8)
• clear spantree adminpathcost (Section 5.2.2.9)
• show spantree adminedge (Section 5.2.2.10)
• set spantree adminedge (Section 5.2.2.11)
• clear spantree adminedge (Section 5.2.2.12)