Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-52 SecureStack A2 Configuration Guide
5.2.1.45 set spantree spanguardtrapenable
Use this command to enable or disable the sending of an SNMP trap message when span guard has
locked a port.
set spantree spanguardtrapenable {disable | enable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to disable the span guard trap function:
disable | enable Disables or enables sending span guard traps. By default,
sending traps is enabled.
A2(rw)->set spantree spanguardtrapenable disable