Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
SecureStack A2 Configuration Guide 5-49
5.2.1.42 show spantree spanguardlock
Use this command to display the span guard lock status of one or more ports.
show spantree spanguardlock [port-string]
Syntax Description
Command Defaults
If no port string is specified, the span guard lock status for all ports is displayed.
Command Mode
Read-Only.
Example
This example shows how to display the span guard lock status for fe.1.1:
port-string (Optional) Specifies the port(s) for which to show span
guard lock status. For a detailed description of possible
port-string values, refer to Section 3.1.1.
A2(su)->show spantree spanguardlock fe.1.1
Port fe.1.1 is Unlocked