Specifications

Startup and General Configuration Summary
Factory Default Settings
2-2 SecureStack A2 Configuration Guide
Does not apply to MATRIX E7.
GVRP Globally enabled.
IGMP Disabled. When enabled, query interval is set to 260 seconds and response
time is set to 10 seconds.
IP mask and gateway Subnet mask set to 0.0.0.0; default gateway set to 0.0.0.0
IP routes No static routes configured.
Jumbo frame support Disabled on all ports.
Link aggregation control
protocol (LACP)
Enabled.
Link aggregation admin
key
Set to 32768 for all ports.
Link aggregation flow
regeneration
Disabled.
Link aggregation system
priority
Set to 32768 for all ports.
Link aggregation outport
algorithm
Set to DIP-SIP.
Lockout Set to disable Read-Write and Read-Only users, and to lockout the default
admin (Super User) account for 15 minutes, after 3 failed login attempts,
Logging Syslog port set to UDP port number 514. Logging severity level set to 6
(significant conditions) for all applications.
MAC aging time Set to 300 seconds.
MAC locking Disabled (globally and on all ports).
Passwords Set to an empty string for all default user accounts. User must press ENTER
at the password prompt to access CLI.
Password aging Disabled.
Password history No passwords are checked for duplication.
Port auto-negotiation Enabled on all ports.
Port advertised ability Maximum ability advertised on all ports.
Table 2-1 Default Switch Settings (Continued)
Feature Default Setting