Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
SecureStack A2 Configuration Guide 5-41
5.2.1.34 clear spantree tctrapsuppress
Use this command to clear the status of topology change trap suppression on Rapid Spanning Tree
edge ports to the default state of enabled (edge port topology changes do not generate traps).
clear spantree tctrapsuppress
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to clear topology change trap suppression setting:
A2(rw)->clear spantree tctrapsuppress