Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-36 SecureStack A2 Configuration Guide
5.2.1.29 show spantree backuproot
Use this command to display the backup root status for an MST instance.
show spantree backuproot [sid]
Syntax Description
Command Defaults
If a SID is not specified then status will be shown for Spanning Tree instance 0.
Command Mode
Read-Only.
Example
This example shows how to display the status of the backup root function on SID 0:
sid (Optional) Display backup root status for a specific
Spanning Tree identifier. Valid values are 0 - 4094.
If not specified, SID 0 is assumed.
A2(rw)->show spantree backuproot
Backup root is set to disable on sid 0