Specifications

SecureStack A2 Configuration Guide 2-1
2
Startup and General Configuration
This chapter describes factory default settings and the Startup and General Configuration set of
commands.
2.1 STARTUP AND GENERAL CONFIGURATION SUMMARY
At startup, the SecureStack A2 switch is configured with many defaults and standard features. The
following sections provide information on how to review and change factory defaults, and how to
customize basic system settings to adapt to your work environment.
2.1.1 Factory Default Settings
Table 2-1 lists default settings for SecureStack A2 switch operation.
Table 2-1 Default Switch Settings
Feature Default Setting
CDP discovery protocol Auto enabled on all ports.
CDP authentication code Set to 00-00-00-00-00-00-00-00
CDP hold time Set to 180 seconds.
CDP interval Transmit frequency of CDP messages set to 60 seconds.
Community name Public.
EAPOL Disabled.
EAPOL authentication
mode
When enabled, set to auto for all ports.
GARP timer Join timer set to 20 centiseconds; leave timer set to 60 centiseconds; leaveall
timer set to 1000 centiseconds.