Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-26 SecureStack A2 Configuration Guide
5.2.1.19 set spantree mstcfgid
Use this command to set the MST configuration name and/or revision level.
set spantree mstcfgid {cfgname name | rev level}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the MST configuration name to “mstconfig”:
cfgname name Specifies an MST configuration name.
rev level Specifies an MST revision level. Valid values are 0 - 65535.
A2(rw)->set spantree mstconfigid cfgname mstconfig