Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-24 SecureStack A2 Configuration Guide
5.2.1.17 show spantree vlanlist
Use this command to display the Spanning Tree ID(s) assigned to one or more VLANs.
show spantree vlanlist [vlan-list]
Syntax Description
Command Defaults
If not specified, SID assignment will be displayed for all VLANs.
Command Mode
Read-Only.
Example
This example shows how to display the SIDs mapped to VLAN 1. In this case, SIDs 2, 16 and 42
are mapped to VLAN 1. For this information to display, the SID instance must be created using the
set spantree msti command as described in Section 5.2.1.12, and the FIDs must be mapped to SID
1 using the set spantree mstmap command as described in Section 5.2.1.15:
vlan-list (Optional) Displays SIDs assigned to specific VLAN(s).
A2(rw)->show spantree vlanlist 1
The following SIDS are assigned to VLAN 1: 2 16 42