Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
SecureStack A2 Configuration Guide 5-23
5.2.1.16 clear spantree mstmap
Use this command to map a FID back to SID 0.
clear spantree mstmap fid
Syntax Description
Command Defaults
If fid is not specified, all SID to FID mappings will be reset.
Command Mode
Read-Write.
Example
This example shows how to map FID 2 back to SID 0:
fid Specifies one or more FIDs to reset to 0.
A2(rw)->clear spantree mstmap 2