Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
SecureStack A2 Configuration Guide 5-21
5.2.1.14 show spantree mstmap
Use this command to display the mapping of a filtering database ID (FID) to Spanning Trees. Since
VLANs are mapped to FIDs, this shows to which SID a VLAN is mapped.
show spantree mstmap [fid fid]
Syntax Description
Command Defaults
If fid is not specified, information for all assigned FIDs will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display SID to FID mapping information for FID 1. In this case, no new
mappings have been configured:
fid fid (Optional) Displays information for specific FIDs.
A2(rw)->show spantree mstmap fid 1
FID: SID:
1 0