Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-14 SecureStack A2 Configuration Guide
5.2.1.7 set spantree bpdu-forwarding
Use this command to set the Spanning Tree BPDU forwarding to enable or disable. By default
BPDU forwarding is disabled.
set spantree bpdu-forwarding {disable | enable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable BPDU forwarding:
NOTE: The Spanning Tree protocol must be disabled (set spantree disable) for this
feature to take effect.
disable | enable Sets BPDU forwarding to enabled or disabled.
A2(su)->set spantree bpdu-forwarding enable