Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
5-8 SecureStack A2 Configuration Guide
Bridge ID MAC Address Unique bridge MAC address, recognized by all bridges
in the network.
Bridge ID Priority Bridge priority, which is a default value, or is assigned
using the set spantree priority command. For details,
refer to Section 5.2.1.21.
Bridge Max Age Maximum time (in seconds) the bridge can wait without
receiving a configuration message (bridge “hello”)
before attempting to reconfigure. This is a default
value, or is assigned using the set spantree maxage
command. For details, refer to Section 5.2.1.25.
Bridge Hello Time Amount of time (in seconds) the bridge sends BPDUs.
This is a default value, or is assigned using the set
spantree hello command. For details, refer to
Section 5.2.1.23.
Bridge Forward Delay Amount of time (in seconds) the bridge spends in
listening or learning mode. This is a default value, or is
assigned using the set spantree fwddelay command.
For details, refer to Section 5.2.1.27.
Topology Change Count Number of times topology has changed on the bridge.
Time Since Top Change Amount of time (in days, hours, minutes and seconds)
since the last topology change.
Max Hops Maximum number of hops information for a particular
Spanning Tree instance may traverse (via relay of
BPDUs within the applicable MST region) before being
discarded.
Table 5-1 show spantree Output Details (Continued)
Output What It Displays...