Specifications

SNMP Configuration Command Set
Configuring SNMP Notification Parameters
SecureStack A2 Configuration Guide 4-49
4.3.7.1 show snmp notify
Use this command to display the SNMP notify configuration, which determines which
management targets will receive SNMP notifications.
show snmp notify [notify] [volatile | nonvolatile | read-only]
Syntax Description
Command Defaults
• If a notify name is not specified, all entries will be displayed.
• If volatile, nonvolatile or read-only are not specified, all storage type entries
will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display the SNMP notify information:
Table 4-10 shows a detailed explanation of the command output.
notify (Optional) Displays notify entries for a specific notify
name.
volatile |
nonvolatile |
read-only
(Optional) Displays notify entries for a specific storage
type.
A2(rw)->show snmp notify
--- SNMP notifyTable information ---
Notify name = 1
Notify Tag = Console
Notify Type = trap
Storage type = nonVolatile
Row status = active
Notify name = 2
Notify Tag = TrapSink
Notify Type = trap
Storage type = nonVolatile
Row status = active