Specifications

SNMP Configuration Command Set
Configuring SNMP Target Parameters
4-38 SecureStack A2 Configuration Guide
Table 4-8 shows a detailed explanation of the command output.
Target Parameter Name = v3ExampleParams
Security Name = CharlieDChief
Message Proc. Model = USM
Security Level = authNoPriv
Storage type = nonVolatile
Row status = active
Table 4-8 show snmp targetparams Output Details
Output What It Displays...
Target Parameter Name Unique identifier for the parameter in the SNMP target
parameters table. Maximum length is 32 bytes.
Security Name Security string definition.
Message Proc. Model SNMP version.
Security Level Type of security level (auth: security level is set to use
authentication protocol, noauth: security level is not
set to use authentication protocol, or privacy).
Storage type Whether entry is stored in volatile, nonvolatile or
read-only memory.
Row status Status of this entry: active, notInService, or
notReady.