Specifications

SNMP Configuration Command Set
Configuring SNMP Target Parameters
SecureStack A2 Configuration Guide 4-37
4.3.5.1 show snmp targetparams
Use this command to display SNMP parameters used to generate a message to a target.
show snmp targetparams [targetParams] [volatile | nonvolatile | read-only]
Syntax Description
Command Defaults
• If targetParams is not specified, entries associated with all target parameters
will be displayed.
• If not specified, entries of all storage types will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display SNMP target parameters information:
targetParams (Optional) Displays entries for a specific target parameter.
volatile |
nonvolatile |
read-only
(Optional) Displays target parameter entries for a specific
storage type.
A2(rw)->show snmp targetparams
--- SNMP TargetParams information ---
Target Parameter Name = v1ExampleParams
Security Name = public
Message Proc. Model = SNMPv1
Security Level = noAuthNoPriv
Storage type = nonVolatile
Row status = active
Target Parameter Name = v2cExampleParams
Security Name = public
Message Proc. Model = SNMPv2c
Security Level = noAuthNoPriv
Storage type = nonVolatile
Row status = active