Specifications

SNMP Configuration Command Set
Configuring SNMP Access Rights
4-28 SecureStack A2 Configuration Guide
Command Defaults
• If security level is not specified, no authentication will be applied.
• If context is not specified, access will be enabled for the default context. If
context is specified without a context match, exact match will be applied.
• If read view is not specified none will be applied.
• If write view is not specified, none will be applied.
• If notify view is not specified, none will be applied.
• If storage type is not specified, entries will be stored as permanent and will be
held through device reboot.
Command Mode
Read-Write.
Example
This example permits the “powergroup” to manage all MIBs via SNMPv3:
A2(rw)->set snmp access powergroup security-model usm