Specifications

SecureStack A2 Configuration Guide xxiii
About This Guide
Welcome to the Enterasys Networks SecureStack A2 Configuration Guide. This manual explains
how to access the device’s Command Line Interface (CLI) and how to use it to configure
SecureStack A2 switch devices.
USING THIS GUIDE
A general working knowledge of basic network operations and an understanding of CLI
management applications is helpful before configuring the SecureStack A2 device.
This manual describes how to do the following:
• Access the SecureStack A2 CLI.
• Use CLI commands to perform network management and device configuration operations.
• Establish and manage Virtual Local Area Networks (VLANs).
• Manage static and dynamically-assigned user policies.
• Establish and manage priority classification.
• Configure security protocols, including 802.1X and RADIUS, SSHv2 and MAC locking.
Important Notice
Depending on the firmware version used in your device, some features described in this document
may not be supported. Refer to the Release Notes shipped with your device to determine which
features are supported.