Specifications

Configuring Protected Ports
Protected Port Command Set
SecureStack A2 Configuration Guide 3-73
3.6.2.4 set port protected name
Use this command to assign a name to a protected port group id.
set port protected name group-id name
Syntax Description
Command Defaults
None.
Command Mode
Read-write.
Example
This example shows how to assign the name “group1” to protected port group 1:
group-id Specifies the id of this group. Id can range from 0 to 2.
name Specifies a name for the group. The name can be up to 32
characters in length.
A2(rw)->set port protected name 1 group1