Specifications

Configuring Protected Ports
Protected Port Command Set
3-72 SecureStack A2 Configuration Guide
3.6.2.3 clear port protected
Use this command to remove a port or group from protected mode.
clear port protected [port-string] | [group-id ]
Syntax Description
Command Defaults
If no parameters are entered, all protected ports and groups are cleared.
Command Mode
Read-write.
Example
This example shows how to clear protected ports ge.1.1 through ge.1.3:
port-string (Optional) Specifies the port or ports to remove from
protected mode.
group-id (Optional) Specifies the id of the group to remove from
protected mode. Id can range from 0 to 2.
A2(rw)->clear port protected ge.1.1-3