Specifications

Configuring Protected Ports
Protected Port Command Set
SecureStack A2 Configuration Guide 3-71
3.6.2.2 show port protected
Use this command to display information about the ports configured for protected mode.
show port protected [port-string] | [group-id ]
Syntax Description
Command Defaults
If no parameters are entered, information about all protected ports is displayed.
Command Mode
Read-only.
Example
This example shows how to display information about all protected ports:
port-string (Optional) Specifies the port or ports for which to display
information.
group-id (Optional) Specifies the id of the group for which to
display information. Id can range from 0 to 2.
A2(ro)->show port protected
Group id Port
----------------------
1 ge.1.1
1 ge.1.2
1 ge.1.3