Specifications

Configuring Protected Ports
Protected Port Command Set
3-70 SecureStack A2 Configuration Guide
3.6.2.1 set port protected
Use this command to specify a port to be protected and assign the port to a group of protected ports.
A port can be assigned to only one group.
set port protected port-string group-id
Syntax Description
Command Defaults
None.
Command Mode
Read-write.
Example
This example shows how to assign ports ge.1.1 through ge.1.3 to protected port group 1:
port-string Specifies the port or ports to be protected.
group-id Specifies the id of the group to which the ports should be
assigned. Id can range from 0 to 2.
A2(rw)->set port protected ge.1.1-3 1