Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
SecureStack A2 Configuration Guide 3-63
This example shows how to display summarized LACP status information for port fe.1.12:
This example shows how to display LACP counters for port fe.1.12:
NOTE: State definitions, such as ActorAdminState and Partner AdminState, are
indicated with letter abbreviations. If the show port lacp command displays one or
more of the following letters, it means the state is true for the associated actor or partner
ports:
E = Expired; F = Defaulted; D = Distributing (tx enabled); C = Collecting (rx enabled);
S = Synchronized (actor and partner agree); G = Aggregation allowed; S/l = Short/Long
LACP timeout; A/p = Active/Passive LACP.
For more information about these states, refer to set port lacp (Section 3.5.4.11) and
the IEEE 802.3 2002 specification.
A2(rw)->show port lacp port fe.1.12 status summary
Port Aggr Actor System Partner System
Pri: System ID: Key: Pri: System ID: Key:
fe.1.12 none [(32768,00e0639db587,32768),(32768,000000000000, 1411)]
A2(rw)->show port lacp port fe.1.12 counters
Port Instance: fe.1.12
LACPDUsRx: 11067
LACPDUsTx: 0
IllegalRx: 0
UnknownRx: 0
MarkerPDUsRx: 0
MarkerPDUsTx: 0
MarkerResponsePDUsRx: 0
MarkerResponsePDUsTx: 374