Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
3-56 SecureStack A2 Configuration Guide
3.5.4.4 set lacp aadminkey
Use this command to set the administratively assigned key for one or more aggregator ports. LACP
will use this value to form an oper key. Only underlying physical ports with oper keys matching
those of their aggregators will be allowed to aggregate.
set lacp aadminkey port-string value
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the LACP admin key to 2000 for LAG port 6:
port-string Specifies the LAG port(s) on which to assign an admin
key.
value Specifies an admin key value to set. Valid values are 0 to
65535.
A2(rw)->set lacp aadminkey lag.0.6 2000