Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
SecureStack A2 Configuration Guide 3-51
3.5.4 Configuring Link Aggregation
Purpose
To disable and re-enable the Link Aggregation Control Protocol (LACP), to display and configure
LACP settings for one or more aggregator ports, and to display and configure the LACP settings for
underlying physical ports that are potential members of a link aggregation.
Commands
The commands used to review and configure LACP are listed below and described in the associated
section as shown.
• show lacp (Section 3.5.4.1)
• set lacp (Section 3.5.4.2)
• set lacp asyspri (Section 3.5.4.3)
• set lacp aadminkey (Section 3.5.4.4)
• clear lacp (Section 3.5.4.5)
• set lacp static (Section 3.5.4.6)
• clear lacp static (Section 3.5.4.7)
• set lacp singleportlag (Section 3.5.4.8)
• clear lacp singleportlag (Section 3.5.4.9)
• show port lacp (Section 3.5.4.10)
• set port lacp (Section 3.5.4.11)
• clear port lacp (Section 3.5.4.12)