Specifications
Link Aggregation Control Protocol (LACP)
LACP Operation
SecureStack A2 Configuration Guide 3-47
3.5 LINK AGGREGATION CONTROL PROTOCOL (LACP)
Using multiple links simultaneously to increase bandwidth is a desirable switch feature, which can
be accomplished if both sides agree on a set of ports that are being used as a Link Aggregation
Group (LAG). Once a LAG is formed from selected ports, problems with looping can be avoided
since the Spanning Tree can treat this LAG as a single port.
Enabled by default, the Link Aggregation Control Protocol (LACP) logically groups interfaces
together to create a greater bandwidth uplink, or link aggregation, according to the IEEE 802.3ad
standard. This standard allows the switch to determine which ports are in LAGs and configure
them dynamically. Since the protocol is based on the IEEE 802.3ad specification, any switch from
any vendor that supports this standard can aggregate links automatically.
802.3ad LACP aggregations can also be run to end-users (that is, a server) or to a router.
3.5.1 LACP Operation
For each aggregatable port on the switch, LACP:
• Maintains configuration information (reflecting the inherent properties of the individual links as
well as those established by management) to control aggregation.
• Exchanges configuration information with other devices to allocate the link to a Link
Aggregation Group (LAG).
• Attaches the port to the aggregator used by the LAG, and detaches the port from the aggregator
when it is no longer used by the LAG.
CAUTION: Link aggregation configuration should only be performed by personnel who are
knowledgeable about Spanning Tree and Link Aggregation, and fully understand the ramifications
of modifications beyond device defaults. Otherwise, the proper operation of the network could be
at risk.
NOTE: Earlier (proprietary) implementations of port aggregation referred to groups of aggregated
ports as "trunks".
NOTE: A given link is allocated to, at most, one Link Aggregation Group (LAG) at a time. The
allocation mechanism attempts to maximize aggregation, subject to management controls.