Specifications

Port Configuration Command Set
Configuring Broadcast Suppression
SecureStack A2 Configuration Guide 3-41
3.3.8.2 set port broadcast
Use this command to set the broadcast suppression limit, in packets per second, on one or more
ports. This sets a threshold on the broadcast traffic that is received and switched out to other ports.
set port broadcast port-string threshold_val
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example configures ports 1 through 5 on unit 2 with a broadcast limit of 50 pps:
port-string Select the ports for which to configure broadcast
suppression thresholds. For a detailed description of
possible port-string values, refer to Section 3.1.1.
threshold_val Sets the packets per second threshold on broadcast traffic.
Maximum value is 148810 for Fast Ethernet ports and
1488100 for Gigabit ports.
A2(su)->set port broadcast fe.2.1-5 50