Specifications

Port Configuration Command Set
Configuring Broadcast Suppression
3-40 SecureStack A2 Configuration Guide
3.3.8.1 show port broadcast
Use this command to display port broadcast suppression limits.
show port broadcast port-string
Syntax Description
Command Defaults
If no ports are defined then broadcast suppression rates will be shown for all ports.
Command Mode
Read-Only.
Example
This example shows how to display the broadcast suppression thresholds for ports 1 through 5 on
unit 2:
port-string (Optional) Select the ports for which to show broadcast
suppression thresholds. For a detailed description of
possible port-string values, refer to Section 3.1.1.
A2(su)->show port broadcast fe.2.1-5
Port Total BC Threshold
Packets (pkts/s)
----------------------------------------
fe.2.1 0 50
fe.2.2 3305 50
fe.2.3 0 14881
fe.2.4 18578 120
fe.2.5 0 14881