Specifications

Port Configuration Command Set
Setting Auto-Negotiation
SecureStack A2 Configuration Guide 3-31
3.3.5.5 clear port advertise
Use this command to configure a port to not advertise a specific speed/duplex capability when
auto-negotiating with another port.
clear port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd |
pause}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
port-string Clear advertisements for specific port(s). For a detailed
description of possible port-string values, refer to
Section 3.1.1.
10t Do not Advertise 10BASE-T half duplex mode.
10tfd Do not Advertise 10BASE-T full duplex mode.
100tx Do not Advertise 100BASE-TX half duplex mode.
100txfd Do not Advertise 100BASE-TX full duplex mode.
1000t Do not Advertise 1000BASE-T half duplex mode.
1000tfd Do not Advertise 1000BASE-T full duplex mode.
pause Do not Advertise PAUSE for full-duplex links.