Specifications

Port Configuration Command Set
Setting Auto-Negotiation
3-30 SecureStack A2 Configuration Guide
3.3.5.4 set port advertise
Use this command to configure what a port will advertise for speed/duplex capabilities in
auto-negotiation.
set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd |
pause}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to configure port 10 to advertise 1000BASE-T full duplex:
port-string Select the ports for which to configure advertisements.
For a detailed description of possible port-string values,
refer to Section 3.1.1.
10t Advertises 10BASE-T half duplex mode.
10tfd Advertises 10BASE-T full duplex mode.
100tx Advertises 100BASE-TX half duplex mode.
100txfd Advertises 100BASE-TX full duplex mode.
1000t Advertises 1000BASE-T half duplex mode.
1000tfd Advertises 1000BASE-T full duplex mode.
pause Advertises PAUSE for full-duplex links.
A2(su)->set port advertise fe.2.10 100txfd