Specifications

Port Configuration Command Set
Setting Auto-Negotiation
SecureStack A2 Configuration Guide 3-29
3.3.5.3 show port advertise
Use this command to display a port’s actual speed/duplex capabilities along with the port’s
advertised speed/duplex capabilities to be used in auto-negotiation.
show port advertise [port-string]
Syntax Description
Command Defaults
If port-string is not specified, advertisement for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display advertisement status for ports 13 and 14:
port-string (Optional) Displays advertised ability for specific port(s).
For a detailed description of possible port-string values,
refer to Section 3.1.1.
A2(su)->show port advertise fe.2.13-14
fe.2.13 capability advertised remote
-------------------------------------------------
10BASE-T yes yes no
10BASE-TFD yes yes no
100BASE-TX yes yes no
100BASE-TXFD yes yes no
1000BASE-T no no no
1000BASE-TFD no no no
pause yes yes no
fe.2.14 capability advertised remote
-------------------------------------------------
10BASE-T yes yes no
10BASE-TFD yes yes no
100BASE-TX yes yes no
100BASE-TXFD yes yes no
1000BASE-T no no no
1000BASE-TFD no no no
pause yes yes no