Specifications

Port Configuration Command Set
Enabling / Disabling Jumbo Frame Support
3-24 SecureStack A2 Configuration Guide
3.3.4.2 set port jumbo
Use this command to enable or disable jumbo frame support on one or more ports.
set port jumbo {enable | disable} [port-string]
Syntax Description
Command Defaults
If port-string is not specified, jumbo frame support will be enabled or disabled on
all ports.
Command Mode
Read-Write.
Example
This example shows how to enable jumbo frame support for Fast Ethernet port 14 in unit 3:
enable | disable Enables or disables jumbo frame support.
port-string (Optional) Specifies the port(s) on which to disable or
enable jumbo frame support. For a detailed description
of possible port-string values, refer to Section 3.1.1.
A2(rw)->set port jumbo enable fe.3.14