Specifications

Port Configuration Command Set
Setting Speed and Duplex Mode
SecureStack A2 Configuration Guide 3-19
3.3.3.2 set port speed
Use this command to set the default speed of one or more ports. This setting only takes effect on
ports that have auto-negotiation disabled.
set port speed port-string {10 | 100}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set fe.3.3 to a port speed of 10 Mbps:
port-string Specifies the port(s) for which to a speed value will be
set. For a detailed description of possible port-string
values, refer to Section 3.1.1.
10 | 100 Specifies the port speed. Valid values are: 10 Mbps or
100 Mbps.
A2(rw)->set port speed fe.3.3 10