Specifications

Port Configuration Command Set
Disabling / Enabling Ports
3-16 SecureStack A2 Configuration Guide
3.3.2.4 set port alias
Use this command to assign an alias name to a port.
set port alias port-string [name]
Syntax Description
Command Defaults
If name is not specified, the alias assigned to the port will be cleared.
Command Mode
Read-Write.
Examples
This example shows how to assign the alias “Admin” to fe.3.3:
This example shows how to clear the alias for fe.3.3:
port-string Specifies the port to which an alias will be assigned. For a
detailed description of possible port-string values, refer
to Section 3.1.1.
name (Optional) Assigns an alias name to the port. If the alias
name contains spaces, the text string must be surrounded
by double quotes. Maximum length is 60 characters.
A2(rw)->set port alias fe.3.3 Admin
A2(rw)->set port alias fe.3.3