Specifications

Port Configuration Command Set
Disabling / Enabling Ports
3-12 SecureStack A2 Configuration Guide
3.3.2 Disabling / Enabling Ports
Purpose
To disable and re-enable one or more ports. By default, all ports are enabled at device startup. You
may want to disable ports for security or to troubleshoot network issues. Ports may also be assigned
an alias for convenience.
Commands
The commands used enable, disable, and name ports are listed below and described in the associated
section as shown.
• set port disable (Section 3.3.2.1)
• set port enable (Section 3.3.2.2)
• show port alias (Section 3.3.2.3)
• set port alias (Section 3.3.2.4)