Specifications

Port Configuration Command Set
Reviewing Port Status
SecureStack A2 Configuration Guide 3-9
3.3.1.3 show port counters
Use this command to display port counter statistics detailing traffic through the device and through
all MIB2 network devices.
show port counters [port-string] [switch | mib2]
Syntax Description
Command Defaults
• If port-string is not specified, counter statistics will be displayed for all ports.
• If mib2 or switch are not specified, all counter statistics will be displayed for
the specified port(s).
Command Mode
Read-Only.
port-string (Optional) Displays counter statistics for specific port(s).
For a detailed description of possible port-string values,
refer to Section 3.1.1.
switch | mib2 (Optional) Displays switch or MIB2 statistics. Switch
statistics detail performance of the switch device. MIB2
interface statistics detail performance of all network
devices.