Specifications

Port Configuration Command Set
Reviewing Port Status
3-8 SecureStack A2 Configuration Guide
Speed Operational speed in Mbps or Kbps of the specified port. For
details on using the set port speed command to change defaults,
refer to Section 3.3.3.2.
Duplex Duplex mode (half or full) of the specified port. For details on using
the set port duplex command to change defaults, refer to
Section 3.3.5.
Type Physical port and interface type.
NOTE: The front panel Stacking Ports will only be displayed with the show port status command
when they are in Ethernet mode. For information on configuring front panel stack ports refer to
Section 2.1.10.1.
Table 3-1 show port status Output Details (Continued)
Output What It Displays...