Specifications

Port Configuration Command Set
Reviewing Port Status
SecureStack A2 Configuration Guide 3-7
3.3.1.2 show port status
Use this command to display operating and admin status, speed, duplex mode and port type for one
or more ports on the device.
show port status [port-string]
Syntax Description
Command Defaults
If port-string is not specified, status information for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display status information for fe.3.1 through 4:
Table 3-1 provides an explanation of the command output.
port-string (Optional) Displays status for specific port(s). For a detailed
description of possible port-string values, refer to
Section 3.1.1.
A2(rw)->show port status fe.3.1-4
Port Alias Oper Admin Speed Duplex Type
(truncated) Status Status
------------ -------------- ------- ------- -------- ------- -------------
fe.3.14 up up 100.0M full 10 t
Table 3-1 show port status Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible port-string
values, refer to Section 3.1.1.
Oper Status Operating status (up or down).
Admin Status Whether the specified port is enabled (up) or disabled (down). For
details on using the set port disable command to change the
default port status of enabled, refer to Section 3.3.2.1. For details
on using the set port enable command to re-enable ports, refer to
Section 3.3.2.2.