Specifications

Port Configuration Command Set
Reviewing Port Status
3-6 SecureStack A2 Configuration Guide
3.3.1.1 show port
Use this command to display whether or not one or more ports are enabled for switching.
show port [port-string]
Syntax Description
Command Defaults
If port-string is not specified, operational status information for all ports will be
displayed.
Command Mode
Read-Only.
Example
This example shows how to display operational status information for fe.3.14:
port-string (Optional) Displays operational status for specific port(s).
For a detailed description of possible port-string values,
refer to Section 3.1.1.
A2(rw)->show port fe.3.14
Port fe.3.14 enabled
NOTE: On the A2H256-16, switch ports 19 and 20 are shown as ports 17 and 18.
On the A2H124-24FX, switch ports 27 and 28 are shown as ports 25 and 26.