Specifications

Process Overview: Port Configuration
Port String Syntax Used in the CLI
3-4 SecureStack A2 Configuration Guide
3.2 PROCESS OVERVIEW: PORT CONFIGURATION
Use the following steps as a guide to configuring switch ports on the device:
1. Reviewing port status (Section 3.3.1)
2. Disabling / Enabling and Naming ports (Section 3.3.2)
3. Setting switch port speed and duplex mode (Section 3.3.3)
4. Enabling / Disabling jumbo frame support (Section 3.3.4)
5. Setting auto negotiation (Section 3.3.5)
6. Setting flow control (Section 3.3.6)
7. Setting port traps (Section 3.3.7)
8. Configuring broadcast suppression (Section 3.3.8)
9. Setting port mirroring (Section 3.4)
10.Configuring link aggregation (Section 3.5)
11.Configuring protected ports (Section 3.6)