Specifications

SecureStack A2 Configuration Guide 3-1
3
Port Configuration
This chapter describes the Port Configuration set of commands and how to use them.
3.1 PORT CONFIGURATION SUMMARY
A2H124-24 and A2H124-24P Switch Ports
The A2H124-24 and A2H124-24P stackable devices provide the following types of switch port
connections:
• 24 RJ45 10/100 Mbps Fast Ethernet copper ports.
• 2 SFP slots (labeled port 27 and 28) that provide the option of installing Small Form Pluggable
(SFP) Mini-GBICs for 1000BASE-T compliant copper connections or 1000BASE-SX\LX
fiber-optic connections.
• 2 1000BASE-T RJ45 connectors (labeled port 25 and 26) that can be used for stack connections
when the switch is operating in a stack configuration, or as standard switch ports when the
switch is operating as a stand alone device.
A2H124-48 and A2H124-48P Switch Ports
The A2H124-48 and A2H124-48P stackable devices provide the following types of switch port
connections:
• 48 RJ45 10/100 Mbps Fast Ethernet copper ports.
Important Notice
CLI examples in this guide illustrate a generic command prompt. Depending on which device
you are using, your default command prompt and output may be different than the examples
shown.