Specifications

Startup and General Configuration Summary
Configuring CDP
SecureStack A2 Configuration Guide 2-119
2.1.17.5 set cdp hold-time
Use this command to set the hold time value for CDP discovery protocol configuration messages.
set cdp hold-time hold-time
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set CDP hold time to 60 seconds:
hold-time Specifies the hold time value for CDP messages in
seconds.Valid values are from 15 to 600.
A2(rw)->set cdp hold-time 60